Hi! Simply click below and type your query.
Our experts will reply you very soon.
We are a one end destination to procure CRIPOL HGN-10 that is a textile printing thickener derived from Guar gum. We make available cold water soluble Cripol HGN-10 thickener that is extensively used for printing on Nylon and silk where fixation of Acid dyes are done by high pressure method. Our CRIPOL HGN-10 has fast developing viscosity, more bright color, High color yield, excellent levelness, high penetration and good wash off properties and have better theology. The Cripol HGN-10 that we supply is known for giving higher production without any faulty prints. Our Cripol HGN-10 is free from chocking of screen. The pH of the printing paste adjusted to 5.0 - 5.5 with a non volatile organic acid. It is compatible with typical discharge chemicals like stannous chloride, Rangolite etc.
Method of preparation
The stock paste of CRIPOL HGN-10 is prepared easily by dissolving 10% powder in cold water uniformly by stirring about 30 minutes. Leave the stock thickening as such for minimum 4 hour. Stir the stock paste well before use. All the required auxiliaries to be added after complete swelling time. Care should be taken to avoid any lump formation.
All the details have given in good faith but without warranty.
|Chemical constitution||Modified mannogalactan/Guar gum|
|Physical appearance||Yellowish powder|
|pH value||6.50 - 7.50|
|Viscosity* 10% conc.||30,000 - 34,000 cps|